| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Automatic Transmission/Transaxle | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000013F901JX |
| Title: A750E AUTOMATIC TRANSMISSION / TRANSAXLE: OIL PUMP: DISASSEMBLY (2008 Sequoia) | ||
DISASSEMBLY
1. REMOVE FRONT OIL PUMP BODY O-RING
|
(a) Remove the O-ring from the oil pump assembly. |
2. FIX OIL PUMP ASSEMBLY
|
(a) Place the oil pump body on the torque converter. |
3. REMOVE CLUTCH DRUM OIL SEAL RING
|
(a) Remove the 3 oil seal rings. |
4. REMOVE STATOR SHAFT ASSEMBLY
|
(a) Remove the 14 bolts, and then remove the stator shaft from the oil pump body. |
5. REMOVE FRONT OIL PUMP BODY O-RING
|
(a) Remove the O-ring from the oil pump body. |
(b) Remove the oil pump body from the torque converter clutch.
6. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY
7. INSPECT STATOR SHAFT ASSEMBLY
8. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY
9. REMOVE FRONT OIL PUMP DRIVE GEAR
10. REMOVE FRONT OIL PUMP DRIVEN GEAR
11. REMOVE FRONT OIL PUMP OIL SEAL
|
(a) Using a screwdriver, pry out the oil seal. NOTICE:
Be careful not to damage the bushing and oil pump body. |
|
|